USB

Connects to Digital still camera/Camcorder/USB storage media.

Note

• Connecting a large USB device may interfere with other devices connected next to it. In such a case, connect it to the other USB input.

USB HDD REC

Connects to the USB HDD device or Digital still camera/Camcorder/USB storage media.
The USB HDD recording function is only available in limited regions/countries/TV models.

BUILT-IN MIC SWITCH

Turns on/off the built-in MIC on the TV. (only TVs with a built-in MIC)

The availability of the terminal label may vary depending on your TV.

HDMI IN

Connects to the HDMI device. The HDMI interface can transfer the digital video and audio on a single cable. To enjoy high quality 4K contents, connect a Premium High Speed HDMI™ Cable(s) and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

HDMI IN (4K 120 Hz)

If you use an HDMI device that supports video output in 4K 100/120 Hz, connect the Ultra High Speed HDMI™ Cable, and follow the instructions displayed on the screen to set the [HDMI signal format] of the HDMI IN port. (HDCP 2.3-compatible)

Note

• 4K 100 Hz support depends on your country/region.

HDMI IN (eARC/ARC)

To connect an audio system that supports eARC (Enhanced Audio Return Channel) or ARC (Audio Return Channel), connect to the HDMI port labelled “eARC/ARC” on the TV. It is a feature that sends audio to an audio system that supports eARC/ARC through an HDMI cable. If the audio system does not support eARC/ARC, you need to connect with DIGITAL AUDIO OUT (OPTICAL).

Hint

There may be three tactile dots, next to the HDMI input terminal depending on your model. Use them as a guide during installation.

or

DIGITAL AUDIO OUT (OPTICAL)

Connects to an audio system with optical audio input.
When connecting an audio system not compatible with ARC using an HDMI cable, you need to connect an optical audio cable to the DIGITAL AUDIO OUT (OPTICAL) to output digital sound.
For details, refer to Digital optical cable connection in Connecting an audio system.

Note

• The terminal vary depending on your model.
• Optical audio output and S-CENTER SPEAKER IN​ share the same terminal or have one terminal each individually (two terminals in total).
• For a model that requires sharing of one single terminal, use the Digital audio connector adapter that comes with the TV to apply as an optical audio output.

S-CENTER SPEAKER IN​

Connects the TV and an audio device with an S-CENTER OUT output/jack using a TV centre speaker mode cable. Before connecting, make sure you unplug the AC power cord (mains lead) of the TV and audio device to be connected.
For details, refer to Using the TV as a centre speaker.

Note

If you do not use the CENTER SPEAKER IN terminal or the S-CENTER SPEAKER IN​ input, you will need to perform the following steps to prevent noise from the speakers.

• Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].

  Jump to the Settings screen

• Optical audio output and S-CENTER SPEAKER IN​ share the same terminal or have one terminal each individually (two terminals in total).

Hint

There may be two tactile dots, next to the S-CENTER SPEAKER IN​ terminal depending on your model. Use them as a guide during installation.

(RF input)

Connects to Cable/Antenna/External Box.

Note

• When connecting the cable to the Cable/Antenna input, finger tighten only. Over tightening the connection can damage the TV.

(Satellite input)

Connects to satellite input.
Connection steps: SUB. → MAIN → Antenna.
For SUB. jack, connect only when you are using twin tuner mode except for Single Cable Distribution EN 50494 & EN 50607 (EN 50607 is only for limited region/country/model).

Note

• When connecting the cable to the Satellite input, finger tighten only. Over tightening the connection can damage the TV.

LAN

Connect to a Router.
Connect to the Internet using a LAN cable.

CAM (Conditional Access Module)

Provides access to pay TV services. For details, refer to the instruction manual supplied with your CAM.

Note

• Do not insert the smart card directly into the TV CAM slot. It must be fitted into the Conditional Access Module provided by your authorised dealer.
• CAM is not supported in some countries/areas. Check with your authorised dealer.
• A CAM message may appear when you switch to a digital programme after using the Internet video.
• Do not remove the dummy card or cover (availability depends on TV model) from the TV CAM slot other than to insert a smart card fitted in CAM.

CENTER SPEAKER IN

To use your TV speakers as the centre speaker, connect the output of your AV receiver to the CENTER SPEAKER IN on your TV.
To use your TV speakers as the centre speaker, press the (Quick Settings) button on the remote control, then select [Settings] — [Display & Sound] — [Audio output] — [Speakers] — [Audio system].

Jump to the Settings screen

Note

• Before connecting cables, disconnect the AC power cord (mains lead) of both the TV and AV receiver.

• If you do not use the CENTER SPEAKER IN terminal or the S-CENTER SPEAKER IN​ input, change the following setting to prevent noise from the speakers.

  Press the (Quick Settings) button on the remote control, and disable [Acoustic Center Sync] in [Settings] — [Display & Sound] — [Audio output] — [Audio system settings].

  Jump to the Settings screen